Skip to content

Bluecover Online Store

0.00€
  • Products
  • Checkout
  • My account
  • 0.00€

Products

Home / Breakout boards / Bluecover TelitSE868V3 GNSS Receiver Breakout Design

Bluecover TelitSE868V3 GNSS Receiver Breakout Design

0.00€

This GNSS receiver breakout uses Telit SE868-V3 chipset with an external antenna for integration with existing market microcontroller devices, such as Arduino and Raspberry Pi. Bluecover is open-sourcing its own breakout design, including the schematic, PCB layout and gerbers, to enable developers to test this chipset performance and produce their own modules.

The Telit SE868-V3 chipset excels in the accuracy, while retailing at a very attractive price point. It is complete multi-constellation position, velocity, and time (PVT) engine featuring high performance, high sensitivity, and low power consumption. This module is capable of excellent performance in harsh environments. The inclusion of the GLONASS and BeiDou constellations yields better coverage, greater accuracy, and improved availability.

If you are looking for GNSS multi-constellation support, as well as support for SBAS and A-GPS, this breakout may present a great solution.

Category: Breakout boards
  • Description
  • Additional information

Description

The SE868-V3 GNSS Breakout was designed as a shield solution to provide an easy integration with BLC GAMMA3 microcontroller board. Nonetheless, it allows an easy integration with most microcontroller interfaces present at market, using UART or I2C interfaces. Microcontrollers working at more than 3.3V require a level shifter board in order to prevent this breakout board of being damaged.

Technical Specification

  • Brand: Bluecover (BLC)
  • Model: BLC SE868V3 breakout (RevC)
  • Breakout Size: 59mmx37mm
  • Breakout Power: any supply voltage between 2.8V to 6V (tested at 3.3V)
  • Chipset: Telit SE868-V3 based on the SiRFstar 5e (B02) flash
  • Chipset constellations: GPS (L1) + Glonass (L1) or GPS (L1) + BeiDou (B1), Galileo ready
  • Chipset GNSS features: SBAS capable (WAAS, EGNOS, MSAS, GAGAN), AGPS, Jamming Rejection
  • Chipset Positional accuracy: 1.2 m
  • Chipset update rate: 1 Hz or 5 Hz
  • Chipset typical TTFFs: Cold Start < 27 seconds, Hot – < 1 second
  • Antenna: uFl connector to support a variety of antennas, supports active or passive antennas (integrated LNA). Designed to work with Taoglas 25A antenna
  • Antenna Powering: jumper selectable to 3.3V, 1.8V or 0V
  • Communication Interfaces: UART and I2C selectable jumper (GPIO’s work at 1.8V but are 3.3V tolerant)
  • Communications: Compatible NMEA v3.1 and OSP (binary) interfaces standards
  • Other interfaces: 1PPS output, with LED for easy FIX indication
  • Power consumption: Less than 123 mW (70mW tracking in Full Power mode + 10mA at 3.3V powering the antenna)

Additional information

Model

BLC SE868V3 breakout (RevC)
Size

59mmx37mm
Power

Any supply voltage between 2.8V to 6V (tested at 3.3V)
Antenna

uFL connector to use an external active or passive antenna
Communications

UART serial (TX, RX) or I2C (SDA, SCL) interfaces

Related products

  • Bluecover MT3333 GNSS Receiver Breakout Design

    0.00€     Add to cart

  • Bluecover u-blox NEO-M8N GNSS Receiver Breakout Design

    0.00€     Add to cart
® Bluecover Technologies
  • Home
  • Products
  • Cart
  • Checkout
  • My account

Design by Smartcat